Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial we can see how to replace the rear headlight bulbs in the Volkswagen Golf, an extremely simple and quick operation. First of all, make sure that the key is not inserted, in order to operate safely, then open the trunk door and remove the panel located on the back of the headlight in question.

Next, unscrew the plastic bolt indicated, disconnect the power connector and, pulling it outwards, separate the headlight from the body. At this point, all that remains is to replace the faulty bulbs and reassemble everything following the reverse procedure.


Posted on 15 July 2025 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Volkswagen Golf 7
How to replace the rear headlight bulb of the Volkswagen Golf 7
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) The correct functioning of all the rear headlight bulbs of your Volkswagen Golf Mk7 is absolutely important not only for your safety, but also and ab…
How do you replace the license plate light on the Volkswagen Golf 6?
How do you replace the license plate light on the Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) It should be noted that the car shown in the video is a Volkswagen Golf 7, but the type of work illustrated and described involves the same operation…
Replacing Cabin Air Filter
Replacing Cabin Air Filter
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The cabin air filter housing is located on the passenger side, just below the glove compartment, near the scuff plate. Remove the plastic cover secur…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos