Do it yourself
| ||||
|
Volkswagen Polo - Video tutorial
Model: Volkswagen Polo
MK V, 6R, Polo 5, MK 5, Polo V
- Years 2009-2017 The reset of the service indicator for the Volkswagen Polo, model 6R, is very simple. This operation is performed after completing all the maintenance actions related to the car service at the workshop. The first thing to do is to press, with the ignition off, the SET button located to the right of the odometer for a few seconds. The second thing to do is to wait for all the indicators on the dashboard to flash and then press the button next to the previously pressed button. Finally, wait for the indicators on the dashboard to turn off and turn on the ignition to verify that the reset has occurred.
Posted on 6 September 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |