Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Xenon Bulb on a Volkswagen Golf VII Without Removing the Headlamp

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight

See other generations:
Video tutorial

Let's see how to replace the Xenon bulb on a Volkswagen Golf VII without completely removing the headlamp. In this case, we will use a different technique.

Remove the wheel and access the headlamp from the wheel arch by removing two screws from the inner wing of the front wheel. From here, you can simply remove the screws holding the headlamp cover (you would have to do this anyway) and replace the bulb.

There are slots inside to extract the bulb, after which you can remove the bulb and replace it. This will save you from having to recalibrate the headlamp, which would be necessary if you had to remove it and then refit it, a much more invasive operation.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Lights on a Volkswagen Golf?
How to Remove the Rear Lights on a Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Removing the rear lights on a Volkswagen Golf, as shown in this tutorial, is a very simple task. Before proceeding, ensure that the key is not in the…
How to Replace the Front Headlight on a Volkswagen Golf 7?
How to Replace the Front Headlight on a Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Replacing the front headlight on a Volkswagen Golf 7 is not as straightforward as one might think; however, the task is perfectly feasible even for a…
How to change the dipped beam headlamp bulb on the Volkswagen Golf VII
How to change the dipped beam headlamp bulb on the Volkswagen Golf VII
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this video, you can see how to change the dipped beam headlamp bulb on a Volkswagen Golf VII: access it easily from the front bonnet of the vehicl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos