Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Brake Discs and Front Bearing

Model: Volkswagen Transporter MK 3, T3, T25 - Years: 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990
Part: Brake rotors

See other generations:
Video tutorial

On this vehicle model, the brake disc integrates the hub bearing, so when replacing the discs, you will need to transfer the hub and bearing from the old disc to the new one. It is also recommended to purchase the complete kit (disc and bearing with hub) as disassembly can often cause damage.

That said, lift the vehicle and remove the front wheel.

Use a punch to extract the pins securing the brake pads and the corresponding spring, slightly retract the piston of the caliper, and remove the old pads. Then, remove the caliper with the bracket, take off the cap at the centre of the hub, and unscrew the nut securing the disc-hub assembly with the bearing.

Remove the clips and take out the bearing to clean, grease, and install it along with the hub on the new disc.


Updated on 20 February 2026 by ScegliAuto


Related tutorials

Removal of the Front Seat of the Volkswagen Transporter
Removal of the Front Seat of the Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) The instructions in this guide will allow you to remove the driver's front seat of the Volkswagen Transporter. First, open the front door of the vehi…
Replacing the Front Brake Pads on the Volkswagen Transporter
Replacing the Front Brake Pads on the Volkswagen Transporter
Volkswagen Transporter (1990-2003 / MK 4, T4) In this guide, you will learn how to remove and replace the front brake pads on the Volkswagen Transporter in simple and quick steps. First, lift the…
Replacing Front Discs and Pads
Replacing Front Discs and Pads
Volkswagen Transporter (2003-2014 / T5, MK 5) To perform this maintenance, lift the vehicle on a ramp and remove the front wheel; take off the protective caps from the caliper mounting pins and u…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos