Do it yourself
| ||||
|
Volkswagen Transporter - Brake discs
Volkswagen Transporter (2003-2014 / MK 5, T5)
Replacement discs and front pads To carry out this maintenance, lift the vehicle on the bridge and remove the front wheel; remove the protective caps of the caliper fixing pins and unscrew the …read all… Posted on 8 September 2023 by ScegliAuto
Volkswagen Transporter (1979-1990 / T25, MK 3, T3)
Disassembly of brake discs and front bearing On this model of vehicle the brake disc integrates the hub bearing and therefore when replacing the discs the hub and the bearing will have to be moved from …read all… Posted on 7 September 2023 by ScegliAuto
Volkswagen Transporter (2003-2014 / MK 5, T5)
Front brake caliper replacement Damage to the brake calipers is not such a frequent failure but overheating of the brake calipers during braking and very often corrosion caused by driving on …read all… Posted on 6 September 2023 by ScegliAuto Cigarette Lighter (3) Airbags (1) Alternator (2) Loudspeaker (1) Shock absorbers (3) Car stereo (7) Battery (3) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (4) Key (4) Timing belt (4) V-belt (1) -board computer (9) Checks and maintenance (96) Dashboard (1) Gearshift gaiter (1) Brake discs (3) Headlight (2) Tail light (1) Air filter (5) Cabin air filter (6) Diesel filter (1) Oil filter (1) Hand brake (1) Clutch (1) Grille (1) Light bulb (2) Headlight bulb (4) Handle (1) Gear oil (1) Engine oil (5) Door panel (4) Brake pads (5) Gear Shift Knob (4) Pump (2) Instrument cluster (14) Passenger compartment heating radiator (2) Wheel (3) Fuse box (49) Seat (9) Coolant temperature sensor (1) Parking sensors (1) Brake system (1) Suspensions (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Thermostat (1) Transmission (1) Windshield washer nozzle (1) |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |