Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Transporter
    4. : Engine coolant temperature sensor

Volkswagen Transporter - Engine coolant temperature sensor

Engine Coolant Temperature Sensor Volkswagen Transporter (1979-1990 / mk 3, t 3, t 25)

Volkswagen Transporter (1979-1990 / MK 3, T3, T25)
Removal of the Cooling Tower for the Coolant
The cooling tower is a component that allows the coolant to be cooled. To remove it, open the engine bay and locate the engine filter box, then clean the inlet …Read all…
Posted on 2 March 2026 by ScegliAuto
Cigarette lighter (4) Airbag (3) Alternator (2) Speaker (3) Shocks (3) Air conditioning (1) Car stereo (12) Roof rack bars (1) Battery (6) Ignition coil (1) Transmission (3) Spark plugs (1) Body (9) Glove compartment (2) Control unit (2) Key (9) Timing belt (8) V-belt (1) Air conditioner (4) Onboard computer (1) Checks and maintenance (42) Dashboard (4) Shifter boot (2) Brake rotors (3) Headlight (4) Tail light (1) Diesel particulate filter (1) Air filter (7) Cabin air filter (9) Diesel fuel filter (6) Oil filter (1) Parking brake (2) Clutch (1) Grille (1) Window switch (1) Light bulb (3) Headlight bulb (7) Tail light bulb (1) Handle (2) Engine (1) Starter motor (2) Transmission fluid (2) Engine oil (3) Power steering fluid (1) Clock (15) Door trim panel (8) Front bumper (1) Brake pads (5) Tires (2) Shift knob (4) Pump (3) Fuel pump (1) Car door (3) Instrument cluster (4) Heater core (2) Wheel (9) Fuse box (133) Seat (16) Engine coolant temperature sensor (1) Parking sensors (1) Door lock (2) Brake system (1) Suspension system (1) Side mirror (4) Rearview mirror (1) AdBlue warning light (14) Warning light – error code (20) Tire pressure warning light (28) Service warning light (149) Manufacturer emblem (1) Fuel cap (1) Windshield wipers (3) Thermostat (2) Drivetrain (1) Windshield washer nozzle (2) EGR valve (1)

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos