Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Volkswagen Transporter - Pump

Volkswagen Transporter (2003-2014 / MK 5, T5)
How do you replace the water pump of the Volkswagen Transporter?
In order to replace the water pump of the Volkswagen Transporter, you need to access the left side of the engine block, where the timing belt is also located. …read all…
Posted on 16 December 2023 by ScegliAuto
Volkswagen Transporter (1990-2003 / MK 4, T4)
Water pump replacement instructions
Start by unscrewing the cap of the expansion tank to eliminate any pressure in the refrigeration system; lift the vehicle on a lift and accessing the right …read all…
Posted on 9 August 2023 by ScegliAuto
Cigarette Lighter (3) Airbags (1) Alternator (2) Loudspeaker (1) Shock absorbers (3) Car stereo (7) Battery (3) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (4) Key (4) Timing belt (4) V-belt (1) -board computer (9) Checks and maintenance (96) Dashboard (1) Gearshift gaiter (1) Brake discs (3) Headlight (2) Tail light (1) Air filter (5) Cabin air filter (6) Diesel filter (1) Oil filter (1) Hand brake (1) Clutch (1) Grille (1) Light bulb (2) Headlight bulb (4) Handle (1) Gear oil (1) Engine oil (5) Door panel (4) Brake pads (5) Gear Shift Knob (4) Pump (2) Instrument cluster (14) Passenger compartment heating radiator (2) Wheel (3) Fuse box (49) Seat (9) Coolant temperature sensor (1) Parking sensors (1) Brake system (1) Suspensions (1) Outside rearview mirror (3) Manufacturer's coat of arms (1) Windscreen wipers (2) Thermostat (1) Transmission (1) Windshield washer nozzle (1)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos