Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the water pump of the Volkswagen Transporter?

Model: Volkswagen Transporter T5, MK 5 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Pump

See other generations:
Video tutorial

In order to replace the water pump of the Volkswagen Transporter, you need to open the hood so that you can access the components located inside the engine compartment: on the left side of the engine block, you will be able to locate the water pump pulley, which must be removed by loosening the central nut. At this point, you can detach the timing belt and proceed to unscrew the screws that secure the pump to its housing: the new one can then be inserted by reconnecting the pulley and belt to check that everything works.


Posted on 31 January 2025 by ScegliAuto


Related tutorials

How to Replace the Water Pump on the Volkswagen Transporter?
How to Replace the Water Pump on the Volkswagen Transporter?
Volkswagen Transporter (2003-2014 / T5, MK 5) To replace the water pump on the Volkswagen Transporter, access the left side of the engine block where the timing belt is also located. The timing b…
Replacing the Timing Belt on the Volkswagen Transporter
Replacing the Timing Belt on the Volkswagen Transporter
Volkswagen Transporter (1990-2003 / MK 4, T4) This guide shows you the main steps to remove and replace the timing belt on the Volkswagen Transporter with a diesel engine. First, lift the vehicle…
What Could Cause the Wipers on a Volkswagen Transporter T5 to Malfunction?
What Could Cause the Wipers on a Volkswagen Transporter T5 to Malfunction?
Volkswagen Transporter (2003-2014 / T5, MK 5) When the washer and wiper on your Volkswagen Transporter T5 misbehave, pay attention to the fault. If it doesn't spray water, before considering the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos