Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Transporter
    4. : How do you replace the water pump of the Volkswagen Transporter?

Volkswagen Transporter - Video tutorial

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Pump
Operation: How do you replace the water pump of the Volkswagen Transporter?

In order to replace the water pump of the Volkswagen Transporter, you need to access the left side of the engine block, where the timing belt is also located. The timing belt will need to be removed from its housing so that the water pump pulley can be identified. By loosening the central nut of this pulley, it will be possible to remove the underlying pump and replace it with a new spare part. After the replacement, all the removed parts can be reinstalled, ensuring that the system functions properly.


Posted on 16 December 2023 by ScegliAuto



What can be the reasons why the Volkswagen Transporter T5 wipers do not work
Volkswagen Transporter (2003-2014 / T5, MK 5) When the windshield washer and the wiper of your Volkswagen Transporter T5 go into trouble, pay attention to what the fault is. If it does not spray
Replacement of the timing belt of the Volkswagen Transporter.
Volkswagen Transporter (1990-2003 / T4, MK 4) Today's guide will show us the main steps to dismantle and replace the timing belt of the Volkswagen Transporter with a diesel engine. Firstly, we li
Water pump replacement instructions
Volkswagen Transporter (1990-2003 / T4, MK 4) Start by unscrewing the cap of the expansion tank to eliminate any pressure in the refrigeration system; lift the vehicle on a lift and accessing the

Other guides that may interest you

How to reset the oil change light on Kymco Agility 125

If we have done the oil change on this type of scooter in do-it-yourself mode, we need to complete the job by resetting the oil change light that came on in the instrument panel display. In the description below we can find the necessary steps to do this. First you need to insert the key on the ignition switch and turn on the ignition. Then show the total mileage on the display and then press the two buttons at the bottom of the panel at the same time until the oil change light goes off.

Watch the video!


by ScegliAuto

More videos