Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard Speakers in a Volkswagen Transporter Van

Model: Volkswagen Transporter T4, MK 4 - Years 1990-2003
Part: Speaker

This tutorial shows how to replace the dashboard speakers in a Volkswagen Transporter van, a very simple and quick operation. First, ensure the key is not in the ignition for safety. Then, pry off the cover of the first speaker using a plastic spatula if necessary. Next, separate the speaker from the mount, disconnect the power connector, and connect the replacement. Finally, reassemble everything by reversing the procedure and repeat the operation on the opposite side.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Speakers in a Volkswagen Transporter
Replacing the Speakers in a Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) The instructions in this guide will show you how to remove and replace the dashboard and door speakers in a Volkswagen Transporter. First, get inside…
Where is the OBD Port in the Volkswagen Transporter Van?
Where is the OBD Port in the Volkswagen Transporter Van?
Volkswagen Transporter (1990-2003 / T4, MK 4) This video shows where the OBD port is located in the Volkswagen Transporter T4 van, useful for checking error codes recorded by the ECU. As shown, t…
Where is the OBD port located in the Volkswagen Transporter van?
Where is the OBD port located in the Volkswagen Transporter van?
Volkswagen Transporter (2014-2025 / MK 6, T6) In this video we can see where the diagnostic port is located in the Volkswagen Transporter van, useful in case we need to check the errors recorded …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos