Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace or Repair the Windscreen Washer Nozzle on the Volkswagen Jetta - Golf

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Windshield washer nozzle

See other generations:
Video tutorial

Today's guide will show you the main steps to replace or repair the windscreen washer nozzles on the Volkswagen Jetta, as well as the Golf. First, open the bonnet of your car and disconnect the windscreen washer nozzle pipe; then use pliers to detach it, as shown in the video.

At this point, use a thin wire to clean the windscreen washer nozzle of any built-up debris; if this is not sufficient, proceed directly with replacing the component, applying the reverse procedure for reassembly!


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Pump of the Volkswagen Jetta - Golf
How to Replace the Windscreen Washer Pump of the Volkswagen Jetta - Golf
Volkswagen Jetta (1998-2005 / A4, MK 4) .. pump of the Volkswagen Jetta, as well as the Golf. First, open the bonnet of your car and locate the windscreen washer pump, which is attached to.. …
Removing Windscreen Washer Fluid Reservoir for Volkswagen Golf-Jetta
Removing Windscreen Washer Fluid Reservoir for Volkswagen Golf-Jetta
Volkswagen Jetta (1998-2005 / A4, MK 4) .. a Volkswagen Jetta, but also applicable to the Golf MK5, by following these instructions. First, open the bonnet and disconnect the electrical connector.. …
Removing the Windscreen Washer Reservoir on Volkswagen Jetta
Removing the Windscreen Washer Reservoir on Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) This video tutorial shows how to remove and replace the windscreen washer fluid reservoir on a Volkswagen Jetta from 2005 to 2010, following the inst…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos