Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Windscreen Washer Fluid Reservoir for Volkswagen Golf-Jetta

Model: Volkswagen Jetta A4, MK 4 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005

See other generations:
Video tutorial

Today, learn how to remove the windscreen washer fluid reservoir from a Volkswagen Jetta, but also applicable to the Golf MK5, by following these instructions. First, open the bonnet and disconnect the electrical connector from the pump; then, using a 10 mm spanner, unscrew the bolt found on the left side of the reservoir.

Next, remove the lower mounting screws and lift the reservoir out of the engine bay; finally, disconnect the fluid hose located underneath the reservoir to fully remove it, as shown in the video.


Updated on 3 May 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Pump of the Volkswagen Jetta - Golf
How to Replace the Windscreen Washer Pump of the Volkswagen Jetta - Golf
Volkswagen Jetta (1998-2005 / A4, MK 4) .. the windscreen washer pump of the Volkswagen Jetta, as well as the Golf. First, open the bonnet of your car and locate the windscreen washer pump,.. …
Removing the Windscreen Washer Reservoir on Volkswagen Jetta
Removing the Windscreen Washer Reservoir on Volkswagen Jetta
Volkswagen Jetta (2005-2010 / MK 5, A5) .. washer fluid reservoir on a Volkswagen Jetta from 2005 to 2010, following the instructions below. First, open and lift the bonnet of your car,.. …
How to Replace or Repair the Windscreen Washer Nozzle on the Volkswagen Jetta - Golf
How to Replace or Repair the Windscreen Washer Nozzle on the Volkswagen Jetta - Golf
Volkswagen Jetta (1998-2005 / A4, MK 4) .. the windscreen washer nozzles on the Volkswagen Jetta, as well as the Golf. First, open the bonnet of your car and disconnect the windscreen washer nozzle.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos