Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Touareg
    4. : Replacement brake pads and discs

Volkswagen Touareg - Video tutorial

Model: Volkswagen Touareg 7L, MK 1 - Years 2002-2010
Part: Brake pads
Operation: Replacement brake pads and discs

The equipment for this job consists of a set of socket wrenches, a hammer, a screwdriver and a special tool. With this tool we are going to remove the plastic caps above the wheel bolts. Using a Torx wrench, unscrew the two screws holding the disc while holding it still. Unscrew the two bolts of the caliper and carefully disassemble the caliper and its support first, however, remove the retaining springs of the pads, which must be removed. Remove the disc and if the disc is blocked, use a rubber hammer and deal a few blows until it comes out completely from the pin. Fit the new disc, put the caliper support, the new pads back on and assemble everything.


Posted on 24 June 2023 by ScegliAuto



How to replace the front brake pads and discs of a Volkswagen Touareg.
Volkswagen Touareg (2010-2018 / MK 2, 7P) In this video tutorial, we will see how to disassemble and replace the front brake pads and discs of the Volkswagen Touareg. First, we lift the vehic
How to replace the pads of a Volkswagen Touareg
Volkswagen Touareg (2010-2018 / MK 2, 7P) How to replace the pads of a Volkswagen Touareg? Let's see the disassembly of the pads on a rear brake disc. We place our car on a column bridge, we
How do you replace the rear brake pads of the Volkswagen Touareg?
Volkswagen Touareg (2010-2018 / MK 2, 7P) To replace the rear brake pads of the Volkswagen Touareg, it is necessary to lift the car so that the rear wheel is not in contact with the ground: t

Other guides that may interest you

    Frequently Asked Questions

    • Touareg 2010-2018 - How to reset the brake warning light on the Volkswagen Touareg? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos