Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Polo?

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Service warning light

See other generations:
Video tutorial

On the Volkswagen Polo, reset the Service light by pressing the button located on the right side of the instrument cluster, just below the speedometer: keep it pressed while the ignition is off. At this point, insert the ignition key and turn it to power on the instrument cluster: once it is on, continue to hold the button for a few more seconds.

You can then release the button, noting that the Service light has been completely reset.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Volkswagen Polo
How to Reset the "Service" Light on a Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
How to Reset the Service Light on a Volkswagen Polo?
How to Reset the Service Light on a Volkswagen Polo?
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) To reset the Service light on a Volkswagen Polo, press and hold the button located on the right side of the instrument panel, just below the speedome…
How to reset the Oil Service light on the Volkswagen Polo?
How to reset the Oil Service light on the Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the Oil Service light on the Volkswagen Polo, press the button located immediately below the instrument cluster on the left side, then inser…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos