Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel in the Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

This tutorial shows how to remove the front door panel in the Volkswagen Golf, an extremely simple and quick operation. First, open the door in question, then detach the cover of the grab handle using a plastic spatula.

Next, unscrew the screw just released along with the one located below the handle itself, remove the lower bolt, and by pulling it outward, separate the panel from the door. At this point, simply disconnect the lock cable and fit the replacement if necessary.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

Removing the Front Door Panel on a Volkswagen Golf Mk4
Removing the Front Door Panel on a Volkswagen Golf Mk4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) In today's video tutorial, you will learn how to remove the front door panel on a fourth series Volkswagen Golf in simple and quick steps. First, ope…
How to Remove the Front Door Panel on a Volkswagen Golf?
How to Remove the Front Door Panel on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this tutorial, we will see how to remove the front door panel on a Volkswagen Golf, a very simple and quick operation. First, open the door you wi…
How to Remove the Door Panel on a Volkswagen Golf
How to Remove the Door Panel on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's instructions will show you the steps to remove and replace the front door panel on a Volkswagen Golf. First, open the front door and start by…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos