Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel on a Volkswagen Golf Mk4

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Door trim panel

See other generations:
Video tutorial

In today's video tutorial, you will learn how to remove the front door panel on a fourth series Volkswagen Golf in simple and quick steps. First, open the front door and unscrew all the screws securing the panel; these are located on the sides of the door shell and beneath the window switch panel (remove the switch panel by prying it up with something thin).

Once all the screws are removed, begin to pry the panel away from the door at multiple points to unclip it; all that’s left is to disconnect the handle cable found at the back!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Removing the Right Front Door Panel of a Volkswagen Golf Mk5
Removing the Right Front Door Panel of a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Perform the removal of the right front door panel of a Volkswagen Golf Mk5. Disconnect the battery terminals in the engine bay. Use a screwdriver to …
Removing the Door Panel of a Volkswagen Golf 4
Removing the Door Panel of a Volkswagen Golf 4
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Let's remove the door panel of a Volkswagen Golf 4 (driver's side), and see how to proceed. Before starting the disassembly, disconnect the battery t…
Disassembling the Front Door Panel of the Volkswagen Golf
Disassembling the Front Door Panel of the Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The instructions below will allow you to disassemble and remove the front door panel of the Volkswagen Golf, GTI version. First, open the front door …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos