Do it yourself
| ||||
|
Volkswagen Crafter - Video tutorial
Model: Volkswagen Crafter
SY, SZ, MK 2
- Years 2017-2024 The service warning light reset on a Volkswagen Crafter vehicle is only performed after completing all the maintenance operations. The basic maintenance consists of replacing the oil and air filters, replacing fluids and topping them up, checking the engine and timing belt. Only after these basic operations can you proceed with the reset of the warning light. To perform the reset, we need to: - turn on the instrument panel and close all doors; - press the TRIP button to access the Menu; - press and hold the call button and the OK button for 5 seconds; - select the "ASSYST PLUS" option; - select the "FULL SERVICE" option and press OK; Complete the reset operation by turning off and restarting the vehicle.
Posted on 16 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |