Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Crafter
    4. : How to reset the maintenance of the Crafter

Volkswagen Crafter - Video tutorial

Model: Volkswagen Crafter SY, SZ, MK 2 - Years 2017-2024
Part: Checks and maintenance
Operation: How to reset the maintenance of the Crafter

In this article, we will see how to reset the maintenance light on the Volkswagen Crafter. First, we need to make sure that the transmission is in neutral if it is a manual transmission or in P if it is an automatic transmission. After that, press the 0.0 button located in the center of the dashboard and hold it down while starting the engine. When the reset oil change service or oil change reset light appears on the dashboard, release the button and press it once to confirm the reset. At this point, the procedure will be complete, and you can restart the dashboard to verify that the process was successful.


Posted on 25 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Crafter 2017-2024 - What symbols represent the indicators in the Volkswagen Crafter? Read Answer
    • Crafter 2006-2017 - What warning lights are there in the Volkswagen Crafter? Read Answer
    • Crafter 2006-2017 - What are the Volkswagen Crafter warning lights? Read Answer
    • Crafter 2006-2017 - What are the warning lights of the Volkswagen Crafter? Read Answer
    • Crafter 2006-2017 - Where can I find the meaning of the dashboard warning lights for Volkswagen Crafter? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos