Do it yourself
| ||||
|
Volkswagen Crafter - Video tutorial
Model: Volkswagen Crafter
SY, SZ, MK 2
- Years 2017-2024 In this video we can see how to reset the maintenance light on the 2017 Volkswagen Crafter: with the instrument panel off, press and hold the reset button for partial kilometers, located in the center of the instrument panel: turn on the instrument panel, without turning on the engine: the message "reset oil change?" appears on the display. Release the button: the reset mode is activated. Press the button briefly to confirm. Service reset. The same procedure is also followed for resetting the inspection: the display will ask if we want to "reset the inspection", then we will follow the same method.
Posted on 9 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |