Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear door panel on the Volkswagen Golf?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the rear door panel on the Volkswagen Golf, a very simple and quick operation. Start by opening the door in question, then using a preferably plastic spatula to avoid leaving marks, unclip the outer cover of the handle.

Next, unscrew the two screws just revealed with a Torx T30 key, unscrew the screws located on the lower edge with a T15 key, and separate the panel by prising along the perimeter. At this point, disconnect both the lock cable and the window regulator connector.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to disassemble the rear door panel of the Volkswagen Golf
How to disassemble the rear door panel of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today's information will show us how to disassemble and replace the rear door panel of the Volkswagen Golf. First, we open the rear door of the car a…
How to Remove the Rear Door on a Volkswagen Golf
How to Remove the Rear Door on a Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today, we will look at the steps to remove and replace the entire rear door on a Volkswagen Golf. First, open the rear door and start unscrewing the …
How to Remove the Rear Door Panel on a Volkswagen Golf?
How to Remove the Rear Door Panel on a Volkswagen Golf?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this tutorial, you will see how to remove the rear door panel on a Volkswagen Golf, a very simple and quick operation. First, open the door you wi…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos