Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disable the stability control system on a Volkswagen Golf?

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
This video is currently unavailable

In this tutorial, you will see how to disable the stability control on a Volkswagen Golf, an operation to be performed only in specific cases and situations where maximum safety can be guaranteed. First, go inside the cabin, then turn on the ignition and press the "CAR" button located to the left of the central display.

Next, enter the "Setup" section located in the bottom right corner, select "ESC system" and set it to the "ASR Off" option. To reactivate the system, simply follow the reverse procedure or restart the vehicle.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to deactivate the stability control system in the Volkswagen Golf?
How to deactivate the stability control system in the Volkswagen Golf?
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this tutorial, you will learn how to deactivate the electronic stability control system in the Volkswagen Golf. This operation is very simple and …
How to activate or deactivate the traction control of the Volkswagen Golf
Volkswagen Golf (2019-2026 / MK 8, Golf 8, Golf Viii) Today we will show you how to enable or disable the traction control system on a Volkswagen Golf model VIII, produced from 2019 to 2026. To enable or…
How to Disable the ESP on a Volkswagen Golf
How to Disable the ESP on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) This guide briefly outlines the instructions to disable or activate the ESP control system on a Volkswagen Golf. First, get in the vehicle and start …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos