Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Bumper of the Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Rear bumper

See other generations:
Video tutorial

Today's step-by-step instructions will show you how to remove and replace the rear bumper of the Volkswagen Polo. First, move to the rear of the vehicle and start unscrewing all the fixing screws found on both sides of the rear wheel arches; then gently detach the bumper from the sides, unscrewing the last missing screws of the bumper to remove it completely, as illustrated in the video.

At this point, install the new rear bumper after painting it, applying the reverse procedure for reassembly!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to replace the rear bumper of the Volkswagen Polo
How to replace the rear bumper of the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) Today's instructions will show us how to disassemble and replace the rear bumper of the Volkswagen Polo, in simple steps. First, we open the rear hat…
How to Remove the Rear Bumper on a Volkswagen Polo?
How to Remove the Rear Bumper on a Volkswagen Polo?
Volkswagen Polo (1994-2003 / Polo 3, MK III, 6N, Polo III, MK 3) In this tutorial, see how to remove the rear bumper on a Volkswagen Polo, a very simple and quick operation. First, open the boot lid, then locate th…
How to Install the Rear Camera on the Volkswagen Polo
How to Install the Rear Camera on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) In this brief and simple guide, you will see the main steps to install the rear camera on the Volkswagen Polo. First, open the boot lid and start rem…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos