Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Volkswagen Caddy?

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Service warning light

To reset the Service light on the Volkswagen Caddy, sit inside the cabin and press the button located at the bottom right of the instrument cluster, labelled "0.0/SET". While holding this button, turn the ignition on by rotating the key in the ignition barrel. Once the ignition is on, you can release the button at the bottom right of the speedometer and press the button at the bottom left once. This will turn off the Service light permanently, and you can then switch off the ignition.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volkswagen Caddy?
How to Reset the "Service" Light on a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) Good morning, today we will focus on resetting the "Service" light on our Volkswagen Caddy. Before proceeding, it is necessary to carry out the servi…
How to reset the service light on the Volkswagen Caddy
How to reset the service light on the Volkswagen Caddy
Volkswagen Caddy (2020-2026 / SB) Today we will see the instructions that will allow us to reset the service light for the regular maintenance of the engine oil change of the Volkswag…
How to reset the service light on the Volkswagen Caddy
How to reset the service light on the Volkswagen Caddy
Volkswagen Caddy (2020-2026 / SB) In a few simple steps, we will see how to reset the maintenance service light for the oil change of the Volkswagen Caddy. First of all, we get into t…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos