Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on a VW Golf

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Headlight

Removing the right front headlamp from a Volkswagen Golf is a straightforward process that you can do yourself. Follow these steps: - open the front bonnet; - remove the lower part of the headlamp by pulling it outwards; - remove the central trim; - remove the lower headlamp trim; - remove the screw that secures the headlamp and pull it out; - disconnect the connector; Follow the same procedure for removing the left headlamp if necessary. For reinstallation, the process is the same but in reverse; this operation can be useful if you need to replace the bulb.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight of the Volkswagen Golf
Replacement of the front headlight of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) Today's procedure will show us how to disassemble and replace the front headlight of the Volkswagen Golf, following the instructions below. First, op…
How to remove the front headlight of the Volkswagen Golf
How to remove the front headlight of the Volkswagen Golf
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) Today we will discover the information that will allow us to disassemble and replace the front headlight of the Volkswagen Golf. First, we open the h…
How to Remove the Front Headlamp of the Volkswagen Golf 7?
How to Remove the Front Headlamp of the Volkswagen Golf 7?
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) To remove the front headlamp of the Volkswagen Golf 7, loosen the screws securing the grille at the front of the engine and remove it. Next, unscrew …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos