Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Caliper/Piston

Model: Volkswagen Transporter T5, MK 5 - Years 2003-2014
Part: Brake pads

First, remove the wheel. Now, at the rear of the brake, disconnect the cable that pulls the handbrake, using a screwdriver and pliers for assistance. Next, undo the upper and lower bolts that secure the caliper. Disconnect the part where the piston is located using a spanner and replace it with the new part, tightening firmly with the spanner. Refit the caliper in place and re-tighten the bolts as before. For the caliper, also reposition the cable using the screwdriver and pliers. Align the bolt above the caliper and replace the wheel.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Brake Pad Replacement
Brake Pad Replacement
Volkswagen Transporter (2003-2014 / T5, MK 5) Lift the vehicle with a jack and apply axle stands for safety; then remove the wheel, take off the protective caps from the brake caliper mounting bo…
Replacing Brake Pads on Volkswagen Transporter
Replacing Brake Pads on Volkswagen Transporter
Volkswagen Transporter (2003-2014 / T5, MK 5) Removing worn brake pads? Let's remove the brake pads from the Volkswagen Transporter. Lift the Transporter with a jack or column lift, then remove t…
Replacing the Front Brake Pads on the Volkswagen Transporter
Replacing the Front Brake Pads on the Volkswagen Transporter
Volkswagen Transporter (1990-2003 / T4, MK 4) In this guide, you will learn how to remove and replace the front brake pads on the Volkswagen Transporter in simple and quick steps. First, lift the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos