Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads on the Volkswagen Passat B8

Model: Volkswagen Passat B8, 3G, MK 8 - Years 2014-2023
Part: Brake pads

This guide shows how to replace the rear brake pads on the Volkswagen Passat B8 without using the VCDS diagnostic software. The first step is to safely lift the vehicle and remove the rear wheels. Release the electronic handbrake before proceeding with the disassembly. Using a lever, remove the retaining spring from the brake caliper, and from the back of the caliper, remove the protective caps from the nuts and unscrew them with an HW7 spanner. Extract the brake caliper and move it aside; remove the worn brake pads. Unscrew the two mounting bolts of the electronic brake motor and, using a puller, push the caliper piston to its maximum open position. If necessary, also replace the brake disc by acting on the mounting bolts. Clean the work area and refit the brake pads onto the support. Refit the brake caliper and secure everything in position.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Passat (2014-2023 / B8, 3G, MK 8) To replace the rear brake pads on a Volkswagen Passat, lift the car using a jack or ramp so that the corresponding wheel is not in contact with the g…
Volkswagen Passat (2005-2010 / B6, 3C) Are the rear brake pads worn? Here’s how to replace them inside the brake caliper. Lift the car on a jack, then remove the wheel (using a socket wren…
Volkswagen Passat (2010-2014 / B7) The following steps will show us how to disassemble and replace the rear brake pads of the Volkswagen Passat. First, lift the vehicle and start by re…

Other guides you may be interested in

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos