Do it yourself
| ||||
|
Volkswagen Multivan - Video tutorial
Model: Volkswagen Multivan
MK 2, T5
- Years 2003-2015 In order to remove the rear seats of the Volkswagen Multivan, you need to push them all the way back so that the covering in the front part of the sliding rails is visible; once this is detached, you can slide the seats all the way forward until they reach the areas with the four grooves. These will allow you to remove the seats from the sliding rails, pulling them out from inside the cabin. Then you can insert the new seats in their place, pushing them back and reinstalling the rail covers.
Posted on 20 February 2024 by ScegliAuto
Other guides that may interest you |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |