Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement and Maintenance of the Cabin Air Filter

Model: Volkswagen Golf Golf IV, Golf 4, MK 4 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Air filter

See other generations:
Video tutorial

Lift the bonnet and unscrew the bolts located near the top right corner of the windscreen, after removing the seal. Now, remove this cover and by lifting the plastic part, you can pull up the air filter, which will come out easily.

Remember the orientation of the filter as it is crucial during reinstallation. After discarding the old filter, position the new one in the same way as the old filter, and taking care not to damage it during reinsertion, refit all covers by following the steps described above in reverse.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The cabin air filter is located on the passenger side, beneath the glove compartment. Remove the Velcro cover to access the air duct; at this point, …
Replacing Cabin Air Filter and Engine Air Filter
Replacing Cabin Air Filter and Engine Air Filter
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) The cabin air filter is located on the passenger side, under the glove compartment, just above the scuff plate. Detach the soundproofing cover, secur…
Replacing Cabin Air Filter
Replacing Cabin Air Filter
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen: open the bonnet, remove the seal at the …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos