Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Light on a Volkswagen Polo?

Model: Volkswagen Polo 6R, Polo V, MK V, Polo 5, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

The airbag light on the Volkswagen Polo indicates a general electronic problem with the airbag system, often related to damage to the light switch. To resolve the issue, you need to remove the airbag from the centre of the steering wheel by loosening the screws at the back.

Once the airbag is extracted, you can loosen the central nut that secures the steering wheel and remove it completely. At this point, detach the plastic covers around the steering column to access the underlying light switch, which can then be removed and replaced with new ones.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) Briefly review the instructions that will allow you to reset the airbag light on the Volkswagen Polo by following these simple steps. To reset the ai…
Volkswagen Polo (2009-2017 / 6R, Polo V, MK V, Polo 5, MK 5) To disable the passenger airbag on a Volkswagen Polo, open the glove compartment located on the front passenger side. In the upper right part, you wi…
Volkswagen Polo (2001-2009 / Polo IV, MK IV, Polo 4, MK 4, 9N) In today's video, we are shown in a few simple steps how to deactivate the passenger airbag of a Volkswagen Polo, fourth generation model produced fr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - The EPC light of the Volkswagen Polo 1.0 TSI Sport BMT is on, what can I do? Read answer

How to Remove the Spare Wheel on a Citroen C4 Grand Picasso

Today, in this short and simple guide, follow the steps to remove the spare wheel from the floor and replace it with the flat one on a Citroen C4 Grand Picasso. First, open the boot's tailgate and start by removing the upper shelf; then use the supplied key to unscrew the spare wheel bolt to remove it, as shown in the video. At this point, lift the vehicle with the jack and unscrew the wheel bolts, replacing it with the spare; then secure it with the bolts, tightening them in a cross pattern!

Watch the video!


by ScegliAuto

More videos