Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Fuel Filler Door on a Volkswagen?

Model: Volkswagen Volkswagen Various
Part: Fuel cap

In your Volkswagen, the fuel filler door may get stuck, possibly due to a fault with the control button or the lock actuator. In these cases, you can still perform an emergency opening by following the procedure shown in this tutorial. First, open the boot, then locate the small panel on the right wall and remove it. Next, grab the red lever and pull it towards you to unlock the lock. At this point, you can refuel and repair the faulty component.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the locked fuel door of a Volkswagen?
How to open the locked fuel door of a Volkswagen?
Volkswagen Volkswagen Various In our Volkswagen, it may happen that the fuel door gets stuck, for example due to a problem with the control button or the lock actuator. In these c…
How to open the hood of a Volkswagen vehicle
How to open the hood of a Volkswagen vehicle
Volkswagen Volkswagen Various In this tutorial, we will see how to open the hood of a Volkswagen vehicle. First of all, we need to pull the release lever located to the left of th…
How to solve the problem of the fuel tank door getting stuck on Volkswagen and Audi cars
How to solve the problem of the fuel tank door getting stuck on Volkswagen and Audi cars
Volkswagen Volkswagen Various In this video, we see how to remedy the issue of the fuel tank door getting stuck on Volkswagen and Audi vehicles: we remove the Torx screw located o…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos