Do it yourself
| ||||
|
Volkswagen Caddy - Video tutorial
Model: Volkswagen Caddy
MK 3, 2K
- Years 2003-2020 In this short and simple guide, we will see how to disassemble and replace the front door panel of the Volkswagen Caddy. First, open the front door and start unscrewing and removing the fixing screws found on the door panel, removing the plastic cover of the handle and the window switch panel; then disconnect the electrical connector found underneath, as shown in the video. At this point, pry on the sides of the panel to detach and remove it, replacing it if necessary with a new one; apply the reverse process for reassembly!
Posted on 3 April 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.042
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |