Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volkswagen Caddy?

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

To reset the Service light on the Volkswagen Caddy, enter the cabin and press the button located at the bottom right of the instrument cluster, labelled "0.0/SET". While holding this button, turn the ignition on by turning the key. After the ignition is on, release the button at the bottom right of the speedometer and press the button located at the bottom left once.

This will turn off the Service light permanently.

To verify that the light has been reset, turn off and then turn on the ignition again.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Volkswagen Caddy
Volkswagen Caddy (2020-2026 / SB) Today we will see the instructions that will allow us to reset the service light for the regular maintenance of the engine oil change of the Volkswag…
How to reset the service light on the Volkswagen Caddy
How to reset the service light on the Volkswagen Caddy
Volkswagen Caddy (2020-2026 / SB) In a few simple steps, here is how to reset the service light for the regular maintenance oil change on the Volkswagen Caddy. First, get in the vehic…
How to Reset the "Service" Light on a Volkswagen Caddy?
How to Reset the "Service" Light on a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) Good morning, today we will focus on resetting the "Service" light on our Volkswagen Caddy. Before proceeding, it is necessary to carry out the servi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos