Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Caddy
    4. : How to remove the rear seats of the Volkswagen Caddy

Volkswagen Caddy - Video tutorial

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: Seat
Operation: How to remove the rear seats of the Volkswagen Caddy

Below we will see the instructions that will allow us to dismantle and remove the rear seats of the Volkswagen Caddy, in simple and quick steps. First of all, we open the rear doors of the vehicle and start by raising the backrest and then rotating the seat; then we detach the seat from the base to remove it (the same applies to the other rear seats), as shown in the video. In this way, we will significantly increase the cargo volume of the trunk; finally, we put the rear seats back in their original position, applying the reverse process!


Posted on 2 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos