Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the door handles on a Volkswagen Golf 7

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Car door

Start by opening the door on which you want to remove the handle. Look closely at the side of the handle. You may find a small hole or plug covering the hole. If there is a plug, remove it to access the hole. Insert a flathead screwdriver or a hook into the hole. This will allow you to unlock the handle clip. Using a plastic removal kit, detach the side cover of the handle. Pass the lever kit around the perimeter of the plastic until it comes off the door. Depending on the side of the door, you may find only the plastic lock or also the lock. Remove the plastic lock or lock from the door. Grab the handle and move it to the left to unlock it from the door. Then, completely remove the handle from inside the door. Insert the new handle into the door (right or left depending on the side). Secure it firmly. Attach the plastic lock or lock back in place. Put the rubber plug back in place.

Posted on 10 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The following steps will show us how to disassemble and replace the rear door speakers of the Volkswagen Golf. First, we open the rear door of the ca…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In this tutorial, learn how to remove and replace the gear knob and gaiter of the Volkswagen Golf. First, get inside the vehicle and start by removin…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Below we will see the steps that will allow us to disassemble and replace the covers of the DSG automatic transmission knob of the Volkswagen Golf. F…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos