Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on the Volkswagen Golf

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Front bumper

See other generations:
Video tutorial

Below are the instructions that will allow you to remove and replace the front bumper on the Volkswagen Golf in simple steps. First, open the bonnet and start unscrewing all the screws located on the top of the front bumper; then remove the bumper grille, as shown in the video.

At this point, unscrew all the screws located on both sides of the front wheel arches, then detach the bumper until it is completely removed; replace it with the new one and reassemble everything, securing it properly with all its screws, following the video tutorial to the end!


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to remove the front bumper of the Volkswagen Golf
How to remove the front bumper of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) In this guide we will see the information that will allow us to disassemble and remove the front bumper of the Volkswagen Golf. First, we open the ho…
How to Remove the Front Bumper of a Volkswagen Golf Mk5
How to Remove the Front Bumper of a Volkswagen Golf Mk5
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) How to remove the front bumper of a Volkswagen Golf Mk5? Let’s see the disassembly. Lift the engine bonnet and secure it; using a socket wrench (batt…
Removing the Front Bumper of the Volkswagen Golf
Removing the Front Bumper of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, we will discover the instructions that will allow you to remove and replace the front bumper of the Volkswagen Golf in simple steps. First, op…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos