Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Door Panel of the VW Golf 6

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: Door trim panel

Dismantling the door panel of the Volkswagen Golf VI is quite straightforward and does not require special precautions. First, note that there are four screws securing the panel, which are Torx type, located under the cover of the central handle. Once the cover is removed, access the screws through the designated holes, then use a plastic lever to disengage the clips along the edge of the panel. It is important to be careful not to break the clips during this phase. Complete the dismantling by disconnecting the connectors and the lock cable.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle Front Door Panel on Volkswagen Golf?
How to Dismantle Front Door Panel on Volkswagen Golf?
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) In this tutorial, see how to dismantle the front door panel on the Volkswagen Golf, an extremely simple and quick operation. First, open the door you…
How to Dismantle the Central Locking of the Volkswagen Golf
How to Dismantle the Central Locking of the Volkswagen Golf
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The following instructions will allow you to dismantle and replace the central locking of the Volkswagen Golf. First, open the driver’s side front do…
How to Dismantle the External Handle of a Volkswagen Golf 6
How to Dismantle the External Handle of a Volkswagen Golf 6
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Let’s see how to dismantle and assemble the external handle located on the door of a Volkswagen Golf 6. Insert a suitable metal key into the slot on …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos