Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the VW Polo 4 Display

Model: Volkswagen Polo MK IV, Polo 4, 9N, MK 4, Polo IV - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Clock

See other generations:
Video tutorial

Today, with the help of our short video tutorial, you will learn how to set the time on the display of your Volkswagen Polo Mk4. This operation follows a very simple procedure. With the ignition off, press the "TRIP" button once on the display.

This will access the time adjustment; now, rotate to the right or left to set the hours. Press the "TRIP" button again to move to the minute adjustment.

Once finished, you can turn on the ignition to confirm the time change on your display.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Set the Time on a Volkswagen Polo
How to Set the Time on a Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) In this brief and simple guide, you will learn how to adjust the time on a Volkswagen Polo by following the instructions below. First, get inside the…
How to Set the Time on the Volkswagen Polo
How to Set the Time on the Volkswagen Polo
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To set the time on the Volkswagen Polo, first turn on the instrument cluster. Next, check the display in the centre of the cluster, where the time is…
How to set the clock on the Volkswagen Polo
How to set the clock on the Volkswagen Polo
Volkswagen Polo (2001-2009 / MK IV, Polo 4, 9N, MK 4, Polo IV) Today's information will allow us to set the time on the display of the Volkswagen Polo instrument panel. First, we get on board the car and start up…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos