Do it yourself
Frequently asked questions about cars and motorcycles

Replacement of the Volkswagen Golf coolant pipe

Model: Volkswagen Golf MK 5, Golf 5, Golf V - Years 2003-2008

Below we will see the instructions that will allow us to disassemble and replace the engine coolant pipe of the Volkswagen Golf. First of all, we open the hood of the car and start disassembling and removing the air filter box and its hose, unscrewing the fixing screws and loosening the metal clamps; then we remove the battery, disconnecting both terminals (positive and negative), as shown in the video. At this point, we disconnect the coolant pipe to replace it with the new one, draining the fluid into a container; we then top it up!

Posted on 2 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Lift the bonnet and place the support rod. First, drain the coolant, then proceed to remove the thermostat. If you do not know how to drain the coola…
Volkswagen Golf (1991-1997 / Golf III, MK 3, Golf 3) Today's information will allow us to disassemble and replace the coolant thermostat of the Volkswagen Golf 1.4. First, we open the hood of the car an…
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The instructions in this guide will show us the procedure for disassembling and replacing the timing belt of the Volkswagen Golf 1.6 TDI. First, we l…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 1997-2003 - How many liters of fuel reserve does the Volkswagen Golf have? Read answer
    • Golf 2019-2026 - What problems does the Volkswagen Golf 8 infotaintment system have? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos