Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery in a Volkswagen car remote control

Model: Volkswagen Volkswagen Various
Part: Key

In this video, we can see how to change the battery of a three-button Volkswagen remote control: first, we open the key by snapping it open and put our fingertips into the slot that has been created, pulling downwards with some force. We immediately expose the battery, which is a common CR2025 button battery: we pry it up with the tip of a small knife, being careful not to cut ourselves, and the battery will literally "pop" out because it has a small spring behind it. We put the new battery in place, paying attention to the polarity (we need to read the writing on top to make sure it is placed correctly) and then we can close the remote control body, exerting a slight pressure.

Posted on 8 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Volkswagen vehicles remote control
How to replace the battery of the Volkswagen vehicles remote control
Volkswagen Volkswagen Various Today we will explain the steps to replace the battery of the remote control for Volkswagen Jetta, Tiguan, and Passat vehicles using a CR 2025 batter…
How to replace the battery in the Volkswagen remote control.
How to replace the battery in the Volkswagen remote control.
Volkswagen Volkswagen Various When the remote control of a Volkswagen or Skoda vehicle stops working, the main possible causes are a dead remote battery or the need for the remote…
Replacing the Remote Battery for Volkswagen
Replacing the Remote Battery for Volkswagen
Volkswagen Volkswagen Various Over time, the battery in the Volkswagen remote will deplete, and you need to replace it. Press the side button to release the key blade, then pry be…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos