Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Volkswagen Polo?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Service warning light

The tire pressure warning light shown on the instrument panel of the Volkswagen Polo can be reset by first inflating the tires to the correct inflation pressure value: when the tires have been inflated, you will need to open the glove compartment located on the front passenger side. Here you will be able to locate the button that allows you to reset the warning light: by holding down this button, you will notice that the warning light disappears from the instrument panel. If the tires have been inflated correctly, then the warning light will not appear again on the display.

Posted on 20 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) This tutorial shows the procedure to reset the service light on a Volkswagen Polo. This is useful if the light remains on even after performing the s…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) Before you can start, sit in the driver's seat of your Volkswagen Polo and close all the doors. Begin by pressing and holding the "0.0/SET" button lo…
Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) To reset the Service light on a Volkswagen Polo, you need to turn on the instrument cluster so you can navigate through the menu options on the onboa…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - What to do when the oil light comes on on Volkswagen Polo? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos