Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of Car Radio - Satellite Navigation System

Model: Volkswagen Passat B6, 3C - Years 2005-2010
Part: Car stereo

With the instructions from this video, you can disassemble the car radio block equipped with a satellite navigation system from your Volkswagen Passat. It's very simple! After removing the upper central cup holders, gently detach the plastic perimeter trim of the car radio with a small screwdriver, unscrew the first lower right screw, the second upper right screw, the lower left screw, and finally the upper left screw. At this point, you can extract the entire car radio block from its housing to proceed with the repair or replacement.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove the radio from the Passat
Volkswagen Passat (2005-2010 / B6, 3C) Do you want to remove the radio from the Passat and replace it with a newer model? Let's look at how to take out all the parts to replace the radio. …
Removing the Car Radio from VW Passat
Removing the Car Radio from VW Passat
Volkswagen Passat (1996-2005 / 3BG, B5) Need to remove the original car radio from a VW Passat to install a new one? Here’s how to do it. Use the original metal keys to remove the car radio…
How to Remove the Radio on Volkswagen Passat
How to Remove the Radio on Volkswagen Passat
Volkswagen Passat (1996-2005 / 3BG, B5) How do you remove the radio from a Volkswagen Passat? Let's look at removing the old radio and installing the new one. Insert the keys into the holes…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos