Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Onboard Computer

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Onboard computer

The video shows how to reset the indication that appears on the display of the onboard computer in your vehicle when performing maintenance. Generally, this operation is done at the shop during the service, but if it lights up, thanks to this brief explanation, you will know how to clear the message.
Turn the key from position 1 (accessory position) to position 2 while simultaneously pressing the reset button next to the display. Wait for the display to blink twice, then release the reset button and turn the key back to position 1. Now, when you turn the ignition back on, you will see that the message is gone.
The car in the video is a Volvo XC90.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to check the oil level from the onboard computer of the 2017 Volvo XC 90
How to check the oil level from the onboard computer of the 2017 Volvo XC 90
Volvo Xc90 (2015-2026 / MK 2) Today we will show you how to check the amount of oil in the tank through the on-board computer of the Volvo XC 90; through the setting it is also po…
How to Reset the Onboard Computer in the Volvo XC90?
How to Reset the Onboard Computer in the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) .. In this tutorial, you will see how to reset the onboard computer in the Volvo XC90. This operation is extremely simple and quick, and.. …
How to reset the onboard computer in the Volvo XC90?
How to reset the onboard computer in the Volvo XC90?
Volvo Xc90 (2015-2026 / MK 2) .. In this tutorial, we will see how to reset the onboard computer in the Volvo XC90, a very simple and quick operation that can be done,.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos