Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light of the Volvo XC90?

Model: Volvo Xc90 MK 2 - Years 2015-2026
Part: Service warning light

The Service indicator that is shown on the display of the Volvo XC90 can be reset by pressing and holding the - button located on the left side of the steering wheel, while the car's instrument panel will not be active. By continuing to hold down the button, you can insert the ignition key and then start the engine using the appropriate button; in this way, the maintenance light will start flashing and you can release the button when the light becomes steady. At the end of the operation, you can turn off the instrument panel to confirm the reset of the indicator.

Posted on 14 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) After performing the maintenance service, it is necessary to reset the service light for the engine oil change; let's see the reset procedure on the …
How to Reset the Service Light on the Volvo XC90
How to Reset the Service Light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) Let's go over the steps to reset the service light for the routine oil change maintenance on the Volvo XC90. First, get inside the vehicle and turn o…
How to reset the service light on the Volvo XC90
How to reset the service light on the Volvo XC90
Volvo Xc90 (2015-2026 / MK 2) To complete the manual reset procedure of the service light on your second generation Volvo XC90, simply follow the steps outlined in the following g…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos