Do it yourself
Frequently asked questions about cars and motorcycles

Solution for Water Ingress in the Cabin

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Body

Water ingress in the cabin is generally caused by blockages in the drainage tubes of the sunroof.
Remove the trim from the windscreen pillar to inspect the tube.
Open the sunroof, pour water along the edges, and check for flow and drainage from underneath the vehicle's floorpan: if there is a blockage, some water will tend to escape from the junction along the tube itself.
Clear the drainage tube with compressed air and, if necessary, replace it, ensuring to seal the junction properly.

Updated on 3 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Volvo S40 (1995-2004 / MK 1) Before topping up the coolant, first check why the level has dropped: it could be a leak or consumption caused by a potential head gasket malfunction…
Volvo S40 (1995-2004 / MK 1) Replacing the timing belt on the Volvo S40 is not a simple task, so it is advisable to visit a workshop for the replacement; however, for the more cu…
Volvo S40 (1995-2004 / MK 1) This video demonstrates the replacement of the timing belt on a Volvo S40. After removing all components that obstruct access to the belt, loosen and…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos