Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Timing Belt Replacement

Model: Volvo S40 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Timing belt

See other generations:
Video tutorial

This video demonstrates the replacement of the timing belt on a Volvo S40. After removing all components that obstruct access to the belt, loosen and remove the old one (after approximately 62,000 miles). The water pump, idler pulley, and tensioner are removed and replaced.

Now fit the new timing belt, paying attention to the direction of the arrows on the belt in relation to the rotation direction. Follow this sequence for replacement: guide pulley, camshaft gear, injection pump gear, water pump tensioner.

Insert the timing tool onto the crankshaft sprocket. Check that the timing marks on the camshaft sprocket are aligned and remember to check the belt tension.


Updated on 9 February 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Belt on a Volvo S40
How to Replace the Timing Belt on a Volvo S40
Volvo S40 (1995-2004 / MK 1) To replace the timing belt on a Volvo S40, open the bonnet to access the components inside the engine bay. On the left side, you will locate the timi…
How to Replace the Timing Belt on the Volvo S40
How to Replace the Timing Belt on the Volvo S40
Volvo S40 (1995-2004 / MK 1) Replacing the timing belt on the Volvo S40 is not a simple task, so it is advisable to visit a workshop for the replacement; however, for the more cu…
How to Replace the Timing Belt on the Volvo S40?
How to Replace the Timing Belt on the Volvo S40?
Volvo S40 (2004-2012 / MK 2) The procedure for replacing the timing belt on the Volvo S40 involves opening the bonnet to access the components located inside the engine bay: on t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos