Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the pollen filter of the Volvo XC60

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this video, we will see how to change the pollen filter of the Volvo XC60: this is located under a panel situated below the glove compartment, in front of the passenger. We will need to remove two screws holding the panel in place, in order to access the compartment, which is further hidden by a box holding a bundle of wiring.

Behind that, we will find a plastic cover that we will remove, and finally behind that, we will find our filter, which we will pull out with our hands. We clean the compartment well from dirt and residue, and then place the new and clean filter in its place.

We close the cover, put the wiring bundle back in place, and close the panel with its screws. Operation completed.


Posted on 10 May 2025 by ScegliAuto


Related tutorials

Where is the oil filter located on the 2010 Volvo XC60?
Where is the oil filter located on the 2010 Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) The oil filter on a 2010 Volvo XC60 is located under the hood. The filter purifies the oil so the engine can run smoothly and is situated beneath the…
Where is the Fuel Filter Located in a Volvo XC60?
Where is the Fuel Filter Located in a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this video, see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it, a very simple and quick operation. …
Where is the Fuel Filter Located in a Volvo XC60?
Where is the Fuel Filter Located in a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is po…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos