Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Fuel Filter Located in a Volvo XC60?

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Diesel fuel filter

See other generations:
Video tutorial

In this video, see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it, a very simple and quick operation. As shown, the filter is located at the bottom of the vehicle and is accessible by going underneath it, of course, after taking all necessary safety precautions.

Once located, open the drain valve, let any water present escape, and unscrew the housing with a wrench. At this point, you can remove the old filter, insert the new one along with a new gasket, and reassemble everything.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

Where is the Fuel Filter Located in a Volvo XC60?
Where is the Fuel Filter Located in a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is po…
Where is the fuel filter located in the Volvo XC60?
Where is the fuel filter located in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this video, you can see where the fuel filter is located in the Volvo XC60 and how to proceed if you need to replace it, a very simple and quick o…
How to Replace the Fuel Filter on a Volvo XC60
How to Replace the Fuel Filter on a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today, follow these step-by-step instructions to remove and replace the fuel filter on a Volvo XC60. First, raise the vehicle and start by removing t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos