Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. Xc60
    4. : Where is the fuel filter located in the Volvo XC60?

Volvo Xc60 - Video tutorial

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Diesel filter
Operation: Where is the fuel filter located in the Volvo XC60?

In this video, we can see where the fuel filter is located in the Volvo XC60 and how to proceed in case we need to replace it, which is an extremely simple and quick operation. As shown, it is located in the lower area of the vehicle, near the left front suspension. To remove it, we first lift the front side of the vehicle, then unscrew the bleeder bolt with a 17mm wrench, insert a tube into the hole and let all the fuel inside come out. Finally, we unscrew the housing with a 32mm wrench, remove the old filter, and install the replacement following the reverse procedure.


Posted on 19 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Xc60 2017-2024 - Where is the fuel filter located in the Volvo XC60? Read Answer
    • Xc60 2017-2024 - Where is the Volvo XC60 diesel filter located? Read Answer
    • Xc60 2008-2016 - Where is the Volvo XC60 diesel filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos