Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Volvo XC60

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Diesel fuel filter

See other generations:
Video tutorial

Today, follow these step-by-step instructions to remove and replace the fuel filter on a Volvo XC60. First, raise the vehicle and start by removing the plastic cover of the fuel filter by unscrewing the mounting screws. Next, remove the protective bracket of the fuel filter, as shown in the video.

At this point, disconnect the fuel lines from the fuel filter, remove it, and replace it with the new original one. Reconnect the lines, reattach the metal shield, and finally, put the plastic cover back on before starting the engine!


Posted on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Diesel Fuel Filter on a Volvo XC60
How to Replace the Diesel Fuel Filter on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) To replace the diesel fuel filter on a Volvo XC60, lift the vehicle using a jack at the rear to access the components underneath. Locate the oil filt…
How to Replace the Diesel Fuel Filter on a Volvo XC60
How to Replace the Diesel Fuel Filter on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) In today's video, see how to replace the diesel fuel filter on the first generation Volvo XC60. First, lift the vehicle on a lift. Now locate the fil…
Where is the Fuel Filter Located in a Volvo XC60?
Where is the Fuel Filter Located in a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this video, see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it, a very simple and quick operation. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos