Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Diesel Fuel Filter on a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Diesel fuel filter

In today's video, see how to replace the diesel fuel filter on the first generation Volvo XC60. First, lift the vehicle on a lift. Now locate the filter housing. Position a drain pan under the vehicle to collect any liquid that will spill out after removing the cap. Remove the cap and let everything drain. Now, remove the old filter from its housing. Clean the area if possible before inserting the new filter. Close the cover, reassemble everything, and lower the vehicle from the lift.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Filter on a Volvo XC60
How to Replace the Fuel Filter on a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today, follow these step-by-step instructions to remove and replace the fuel filter on a Volvo XC60. First, raise the vehicle and start by removing t…
Where is the oil filter located on the 2010 Volvo XC60?
Where is the oil filter located on the 2010 Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) The oil filter on a 2010 Volvo XC60 is located under the hood. The filter purifies the oil so the engine can run smoothly and is situated beneath the…
How to Replace the Cabin Air Filter on a Volvo XC60?
How to Replace the Cabin Air Filter on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the cabin air filter on the Volvo XC60, detach the panel located on the left side of the footwell on the passenger side: once this panel i…

Other guides you may be interested in

    Frequently Asked Questions

    • Xc60 2017-2026 - Where is the fuel filter located in the Volvo XC60? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos